AlexBot 3000 Build Guide
Follow these steps to build your own ABot. Each step includes detailed instructions and visual references.
Attach motor mount to base plate
Attach the motor mount to the base plate using 8 M3 by 12mm screws. Ensure the mount is tight before moving on to the next step, as they can not be accessed once the motors are installed.
Mount and secure the motors
Mount and secure the motors to the motor mount using 8 M3 nuts and 8 M3 by 10mm screws. Ensure the motors are aligned correctly and fit flush with the end of the mount as shown before tightening the screws or you may damage the mount.
Attach battery mount to base plate
Test test test
Attach front panel to base plate
Test test test
Insert 4 M3 nuts in the captive holes
Test test test
Attach the 4 upper standoffs
Test test test
Add and secure the mid plate
Test test test
In
Test test test
Mo
Test test test
Test
Co
Test
Mo
Ro
Org
Ins
Atta
Uplo
Con
Init
Perfor